This 20-bar pump module has been developed mainly for industrial applications, for research projects and other special tasks. It is designed for continuous operation - contrary to all other 20 bar systems which may run only in interval mode to prevent overheating.
In the "C-flo" two pump modules work parallel and alternating (with nonreturn valves) so that a constant stream of liquid a t an operating pressure of 20.6 bar is created.
Usually the system is externally controlled by a sensor not included in the package.
You may, however, communicate your needs so that we can offer you a custom made control if desired.
In the standard version the "C-flo"-systems are resin-cast into an aluminium-casing and mounted in an aluminium-console.
If desired the casings can be manufactured in stainless steel grade 18.8 as is required in the food industry.
In this case the system is able to handle weak acids or lyes (up to 25 %) or even so called fine-oils (up to a viscosity of 20 cStock), respective atomize the liquid with up to 6 Plantfog fogging nozzles (sizesK-100, K-150 or K-200).
Usually the pump modules are connected to a feeder tank, but there are also versions for connection to a water tap (refer to Tap Connected Systems ) or as silent submerged pumps (refer to Submerged Systems).